Effective channels through the Cisco 300-370 exam – latest 300-370 exam dumps

What is the best way to pass the Cisco 300-370 exam? (First: Exam practice test,
Second: Lead4pass Cisco expert.) You can get free Cisco CCNP Wireless 300-370 exam practice test questions here. Or choose https://www.leads4pass.com/ccnp-wireless.html .Study hard to pass the exam easily!

Cisco CCNP Wireless 300-370 Exam Video

Table of Contents:

Latest Cisco CCNP Wireless 300-370 google drive

[PDF] Free Cisco CCNP Wireless 300-370 pdf dumps download from Google Drive: https://drive.google.com/open?id=12Vvbl7aq-Yl_QIwueJekdSrHlX4CcRKm

300-370 WITSHOOT – Cisco:https://www.cisco.com/c/en/us/training-events/training-certifications/exams/current-list/witshoot.html

This exam tests a candidate’s knowledge of troubleshooting and optimizing Enterprise wireless infrastructure and related services plus the tools and methodologies needed to identify and resolve client connectivity, performance, and RF issues.

Latest updates Cisco 300-370 exam practice questions

QUESTION 1
A Wireless LAN Cisco engineer is troubleshooting 802.11ac WLAN at customer site. Due to interferences with
neighboring 802.11n networks, the engineer must determine the current primary/secondary channel allocation to
enhance the current configuration. Channel 60 has been chosen by the customer as primary 20 MHz channel. Which
combination determines the resulting primary 40 MHz and primary 80 MHz channels?
A. primary 40 MHz: channel 62, primary 80 MHz: channel 58
B. primary 40 MHz: channel 54, primary 80 MHz: channel 58
C. primary 40 MHz: channel 64, primary 80 MHz: channel 60
D. primary 40 MHz: channel 60, primary 80 MHz: channel 56
Correct Answer: A

 

QUESTION 2
Two 5508 Wireless Lan Controllers are managing all Access Points throughout the network The WLCs are located in
different locations to provide geographical redundancy. A Mobility Group has been configured on both WLC\\’s and has
a UP status on both Controllers. The APs in location A are statically configured to use Controller A as the Primary and
Controller as the Secondary. If the WLC in location A goes offline, the APs successfully join the WLC in location but they
do not failover to their Primary configured Controller. What configuration task will fix this issue?
A. Change the AP Failover Priority to critical.
B. Enable AP Fallback globally on the WLC.
C. Configure the WLC in location A as Primary using the CAPWAP AP Controller IP Address command on all the
location A Access Points.
D. Use DHCP Option 43 and specify WLC in location A as Primary.
Correct Answer: C

 

QUESTION 3
Refer to the exhibit.lead4pass 300-370 exam question q3

Which statement about the join process of the access point is true?
A. The time on the controller is outside of the certificates validity time interval, so the join phase failed.
B. The AP successfully joined the controller.
C. The AP moved from this controller to its primary controller.
D. The AP failed to join because the MAC address of the AP was not correct on the controller.
E. The controller rejected all discovery requests from the AP because they were not received on the management
interface subnet.
Correct Answer: E
References:

 

QUESTION 4
An engineer has run the debug dhcp packet enable command on the wireless LAN controller CLI. Which field contains
the IP address offered to the client?
A. siaddr
B. ciaddr
C. viaddr
D. giaddr
Correct Answer: C


QUESTION 5
While reviewing CleanAir data in Cisco Prime Infrastructure, an engineer notices that a wideband jammer is not sending
its Interferer Security Trap correctly. The engineer determines that the default severity level has been changed. Which
value does the engineer select to reset the severity level to its factory setting?
A. informational
B. major
C. minor
D. warning
E. critical
Correct Answer: D

 

QUESTION 6
An engineer wants to run the Voice Audit tool in PI and wants to be able to verify:
that clients will be capable of having static IPs whether or not Call Admission Control is enabled Which two rules field
descriptions must be checked in the report? (Choose two.)
A. DHCP assignment
B. CAC: max bandwidth
C. ACM
D. DTPC
E. load-based CAC
Correct Answer: AE
Reference: https://www.cisco.com/c/en/us/td/docs/net_mgmt/prime/infrastructure/3-2/reference/guide/pi_ref.pdf

 

QUESTION 7
A mobile workstation in a factory contains an AP that is configured as a workgroup bridge. When the workstation moves,
it loses connectivity and disrupts operation. What can the engineer implement to minimize roaming problems?
A. Use 802.1X authentication.
B. Use Cisco Centralized Key Management for fast roaming.
C. Use AES for encryption.
D. Use the mobile station command.
Correct Answer: B


QUESTION 8
In a Cisco OfficeExtend environment, which encryption type is used between the access point and the wireless LAN
controller?
A. DTLS
B. TLS
C. STLS
D. OpenSSL
Correct Answer: A
DTLS data encryption is enabled automatically for OfficeExtend access points but disabled by default for all other
access points. Most access points are deployed in a secure network within a company building, so data encryption is
not necessary. In contrast, the traffic between an OfficeExtend access point and the controller travels through an
unsecure public network, so data encryption is more important for these access points. When data encryption is
enabled, traffic is encrypted at the access point before it is sent to the controller and at the controller before it is sent to
the client.

 

QUESTION 9
A client is failing EAP authentication and a debug shows that the server is sending an Access-Reject message. Which
action must you take to resolve authentication?
A. Verify that the Validate server certificate on the client is disabled.
B. Verify that the client certificates are from the proper CA and server certificate.
C. Verify that the client server certificate has the proper Windows OIDs.
D. Verify that the user account is the same in the client certificate.
E. Verify that the user is using the same password that is on the server.
Correct Answer: B

 

QUESTION 10
Which statement about the usage of the debug command in a Cisco Unified Wireless Network is true?
A. Debug is enabled until manual shut off.
B. Debug is a message logging severity 7.
C. Debug is a restricted command and is not available in the AP CLI.
D. Debug is available on the WLC serial console and web interface.

Correct Answer: B

 

QUESTION 11
Which visual cue accurately describes a characteristic of the zone of impact displayed in Cisco Prime Infrastructure?
A. The closer the circle is to blue, the more localized the impact is.
B. The smaller the circle, the more localized the impact is.
C. The larger the circle, the more severe the impact is.
D. The more translucent the circle is, the more localized the impact is.
Correct Answer: B

 

QUESTION 12
Drag and drop the IP address range on the left onto the specific purpose for multicast groups on the right. Not all
options are used.
Select and Place:lead4pass 300-370 exam question q12

Correct Answer:

lead4pass 300-370 exam question q12-1

 

QUESTION 13
Refer to the exhibit.lead4pass 300-370 exam question q13

The AP is unable to join the controller. What is the cause of this error?
A. The controller code version is lower than the code of the AP attempting to join.
B. AP code is not the same as the controller and must download firmware.
C. AP model is not compatible with the controller code version.
D. The AP is not configured in the controller auth-list of acceptable APs.
Correct Answer: C

Related 300-370 Popular Exam resources

titlepdf youtube Cisco lead4pass Lead4Pass Total Questions
Cisco CCNP Wireless lead4pass 300-370 dumps pdf lead4pass 300-370youtube 300-370 WITSHOOT – Cisco https://www.leads4pass.com/300-370.html 124 Q&A
lead4pass 300-360 dumps pdf lead4pass 300-360 youtube 300-360 WIDESIGN – Cisco https://www.leads4pass.com/300-360.html 221 Q&A
lead4pass 300-365 dumps pdf lead4pass 300-365 youtube 300-365 WIDEPLOY – Cisco https://www.leads4pass.com/300-365.html 144 Q&A
lead4pass 300-375 dumps pdf lead4pass 300-375 youtube 300-375 WISECURE – Cisco https://www.leads4pass.com/300-375.html 148 Q&A

Lead4Pass Year-round Discount Code

lead4pass coupon

What are the advantages of Lead4pass?

Lead4pass employs the most authoritative exam specialists from Cisco, Microsoft, CompTIA, IBM, EMC, etc.
We update exam data throughout the year. Highest pass rate! We have a large user base. We are an industry leader! Choose Lead4Pass to pass the exam with ease!

why lead4pass

Summarize:

It’s not easy to pass the Cisco 300-370 exam, but with accurate learning materials and proper practice,
you can crack the exam with excellent results. Lead4pass.com provides you with the most relevant learning materials that you can use to help you prepare.